LAUNCH TEAM: TM2 report second stage slews is received.
Roger.
LAUNCH TEAM: TM1 report first stage slews is received.
LAUNCH TEAM: Roger.
LAUNCH TEAM: Timer monitor second stage pump run time.
LAUNCH TEAM: Roger. LAUNCH TEAM: On external.
LAUNCH TEAM: FMA on your Mark, PD2 to on.
LAUNCH TEAM: Three. Two. One. Mark.
LAUNCH TEAM: One and four and six.
One and six. Three and four. Two. Five. Pitched up and to the second plateau. Pitching down to center. Centered.
Pitch down, first plateau. Second plateau. Returning to center. Centered. Yawing rate first plateau, up to the second, left to center.
Center. Yaw left. First plateau. Out to the stop. Returning to center. Second stage slews are complete.
LAUNCH TEAM: SSC hydraulic, external power off.
LAUNCH TEAM: Off. EE one down, two up, two to stop. Returning to center and center. One up, two down. Second motion, two to stop.
Returning to center.
Center. One and two pitch up. Second motion two to stop and stop. Return to center and center.
one and two pitch down. Second motion to the stop and stop. Return to center and center
Yaw right. Second motion. Two to stop. Return to center, and center. One down, two up. Second motion. Two to stop.
Returning to center, and center. One up, two down. Second motion.
Returning to center. Center. Main engine pitching up. Second motion to the stop and stop. Returning to center. Center.
Pitch down. Second motion to the stop and stop. Return to center. Center.
Yaw right. Second motion to the stop and stop. Return to center. Center. Yaw left.
Second motion to the stop and stop. Return to center and center. First stage slews complete.
LAUNCH TEAM: Off.
LAUNCH TEAM: Timer report second stage hydraulic pump turn off time.
LAUNCH TEAM: QAR record 92448.
LAUNCH TEAM: Copy 92448.
LAUNCH TEAM: Report second stage hydraulic pump run time duration.
LAUNCH TEAM: QAM 141.
LAUNCH TEAM: Copy 141.
LAUNCH TEAM: HYU report second stage bleed down time.
LAUNCH TEAM: Eleven decimal five seconds.
LAUNCH TEAM: Copy, 11.5.
LAUNCH TEAM: SCM hydraulic charts to one mil.
LAUNCH TEAM: One mil.
LAUNCH TEAM: SSC slew limits off.
LAUNCH TEAM: Off.
LAUNCH TEAM: SSC slew limits off.
LAUNCH TEAM: Off.
LAUNCH TEAM: Timer, set up the countdown generator for T-20 minutes and holding.
LAUNCH TEAM: Roger.
LAUNCH TEAM: TM2 establish record on change list. JET unscore response. Deactivated.
LAUNCH TEAM: Deactivated.
LAUNCH TEAM: SYS establish battery amp power calculations on.
LAUNCH TEAM: Roger.
LAUNCH TEAM: LCDR, this is ATC.
LAUNCH TEAM: Go ahead.
LAUNCH TEAM: First stage helium and nitrogen bottles of KHX are complete and acceptable.
LAUNCH TEAM: Roger that.
LAUNCH TEAM: LPRSSP on one.
LAUNCH TEAM: Go ahead.
MR. DILLER: This is Delta Launch Control at T-21 minutes, 42 seconds and counting.
Doing checks of the second stage and first stage engines are complete. Those are called gimbal slew checks. Those have gone well.
And we're about to enter a planned built-in hold in about another 90 seconds. And at that point we'll get a very quick update on the weather.
This will be a ten-minute built-in hold and comes up -- has a chance for catch up for
anything still remaining in the procedure that could be a little bit behind.
But at this point, looks like it will be a very quiet built-in hold.