Once the hatch open,
we're going to have, Jessica coming out first.
She gets the strut back, which is an eight foot long bag,
and then she gets a cable bag.
Then Chris comes out.
After they're both outside, Jessica will be the first one
that will start translation to the P4 area where the MOD KIT is located.
So you'll see it here in the animation.
She starts moving through the Truss all the wa down to the MOD KIT.
At the same time, Chris is going to do a quick stop,
get a WIFEX which is an equipment that will give him more distance
once he gets into the foot restraint so he can reach to the MOD KIT itself.
Once they get there,
they're going to cinch down the bags and then they begin the installation.
So they start with mid-strut and then Jessica gets the other side-
the left mid-strut and the lower strut-hands it to Chris
who's already on the foot restraint, then Jessica goes around
and Chris will then be turned, so that he can be facing
on the other side of the canister where he will start now working with Jessica
to put the mid-struts themselves.
Okay, so here’s where they bolt the second mid-strut.
And after that, the whole assembly of the MOD KIT
is now completed with the cables that will be required for later on.
After that's completed, Jessica is going to go down,
on one side of the area where they were, put the DDCU jumpers,
while Chris is moving now to the Race Ring,
as I mentioned before, to take a snapshot of the current state.
So here he goes. He takes a few pictures
for us to understand the state.
And then he comes back.
Once he comes back to the same location where we had cinched down the two bags,
he will begin now the torque reset. So open the cable bag,
get the tool that he needs, and then he begins
the torque resets for several of the boxes that you see here.
Once that is completed, Chris
is coming back to the airlock where he starts doing the microorganisms.
So you can see that he has the canisters on his side.
He brings in the tool,
he does the swabbing, and then he puts it back into the tool.
At the moment he puts it on the tool,
it locks in the sample, and so he goes for the next sample.
There's seven samples that we're going to go do.
The minimum number for our activity this go around is five samples.
So in this specific view, you will see him going back
inside the airlock to do two of the swabs that he has on his SEU.
In the meantime, Jessica now has make it
to a location on the truss where the robotic arm gets closer to her.
She puts the cover on the camera itself on the robotic arm and then
the robotic arm moves out of the way, and she makes it back to the airlock.
And here you see Jessica putting the cable bag back inside,
and then back inside the airlock for the end of our EVA.
And that will conclude EVA 94.