[Music]
here we have Luca Andrew prepared for
the second of the AMS repair EVs
following a very successful leave a
number one here we have Luca heading up
the Cetus burr to meet the SSRMS to
prepare for his flight to AMS while drew
will be heading up the zetas burn with a
tool bag and he'll be heading out
directly to ELC to prepare his work site
in to assist Luca in there Evi to repair
work Luca has to pitch down the whiff
extender here
he left the API farmer fixing on the end
of the arm on the end of the last TVA in
order to save time on this one so he'll
get the right setting set up here
ingress the apfr and prepare for the
flying over to AMS
[Music]
once in breasts into the first round the
end of the canadarm2 there'll be another
big maneuver over top of station with
great views as Lucca heads to the
Xenocide of AMS this time to work on
some MLI covering some power cables
the SSRMS will slide Lucca in between
lc2 and AMS and he'll get to work with
some Russian cutting tools to open up
the mm a lot of multi-layer insulation
in this area he'll be accessing two
power cables that were on and thus for
other hardware and we'll utilize those
to connect up to a set of ev8 cables to
prepare for the pump box arrival on TV
number three
[Music]
once those cables are temps total open
up yet more I'm aligned that area to
prepare for the mechanical attach device
our mad install on the beam this mad
will be utilized on evey a 3/4 of the
mechanical attachment of the pump box so
following this test the power data and
mechanical components will all be ready
for that pump box to come right out on
the beginning of EBA 3 completing that
work the SSRMS will maneuver Luca from
the Xenocide back a little bit Nader in
between est LC 2 and AMS to the same
work so he was at during EBA 1 from here
he will use a large set of rough cutters
to cut a fill line that will vent out
the remaining co2 in the coolant system
allowing for the fine detailed cuts that
will be utilized to connect up this
system on tv3 at the vertical support be
more excited he'll have six tubes that
I'll have to cut those six tubes we six
of eight tubes that will be connected to
the new pump system on the subsequent
EBA
those tubes as they're cut will be
capped and identify with tube numbers
from there the SSRMS will maneuver Luca
below AMS for the final two cuts he'll
open up the Emmaline that work site
until install a tube support bracket
which will protect the other sensitive a
most Hardware in the stereo while he's
working here and finished up with the
two remaining cuts that will also be
capped
[Music]
with eight of eight tubes now cut and
capped the SSRMS will maneuver Luka back
forth the face one of the trust where he
got on and it'll egress the SSRMS there
and head back in the airlock after
successfully VA number two while he's
riding back on the SSRMS drew will be
cleaning up the bags that have been
stood on you'll see two bearing that
works I for the in-between time between
the EVs and then translated back under
the mobile transporter and back to the
airlock and stuff this will set up the
AMS in the station to bring out the new
pump system at the beginning of VV a3 to
have it installed ready for fluid power
and data connections